Primary Display; Internal Graphics - Biostar H61MGV3 Manual

H61MGV3 / H61MLV3 UEFI BIOS Manual
Graphics Configuration

Primary Display

This item selects which of IGFX/PEG/PCI Graphics device should be Primary
Display or select SG for Switchable Gfx.
Options: Auto (Default) / IGFX / PEG

Internal Graphics

This item keeps IGD enabled based on the setup options.
Options: Auto (Default) / Disabled / Enabled
GTT Size
This item selects GTT Size.
Options: 2MB (Default) / 1MB
Aperture Size
This item selects Aperature Size.
Options: 256MB (Default) / 128MB / 512MB
DVMT Pre-Allocated
This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device.
Options: 64M (Default) / 32M / 96M / 128M / 160M / 192M / 224M / 256M /
288M / 320M / 352M / 384M / 416M / 448M / 480M / 512M / 1024M
DVMT Total Gfx Mem
This item selects DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Options: MAX (Default) / 128MB / 256MB
RC6 (Render Standby)
This item enables render standby support
Options: Enabled (Default) / Disabled
18