Eco Settings - Philips 49PUS7503 User Manual

Immersion
 Settings > All settings
> Ambilight > Ambilight+hue > Immersion.
Press the arrows  (up) or  (down) to adjust
how accurate the Hue bulbs follow the Ambilight.
Lounge Light+hue
If you installed Ambilight+hue, you can let the hue
bulbs follow Lounge Light from Ambilight. The Philips
hue lamps will expand the Lounge Light effect across
the room.
Switch on/off the hue bulbs
 Settings > All settings
> Ambilight > Ambilight+hue > Lounge light+hue.
View Configuration or Reset
View current setup of the Ambilight+hue, network,
Bridge and bulbs
 Settings > All settings
> Ambilight > Ambilight+hue > View configuration.
Reset current setup of the Ambilight+hue
 Settings > All settings
> Ambilight > Ambilight+hue > Reset
configuration.
Advanced Ambilight Settings
Neutralise the influence of a coloured wall on the
Ambilight colours
 Settings > All settings
> Ambilight > Advanced > Wall colour.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they
are intended.
 ISF Tuning
 Settings > All settings
> Ambilight > Advanced >
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
 Settings > All settings > Ambilight > Advanced >
TV switch off.
 ISF tuning.
14.4

Eco Settings

Set energy saving level
 Settings > All settings > Eco settings > Energy
saving.
Select Maximum, Medium, or Minimum to have
different degress for energy saving, or select Off to
switch off energy saving mode.
Set screen off to save energy consumption
 Settings > All settings > Eco settings > Screen
off.
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
 Settings > All settings > Eco settings > Light
sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Set TV switch off timer
 Settings > All settings > Eco settings > Switch off
timer.
Press the arrows  (up) or  (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to 0.
52