Table of Contents
Advertisement
Clear dialogue
Settings > Sound > Personal mode settings
> Clear dialogue > On.
Select On to get an improved sound quality for
speech programme.
AI Equalizer
Settings > Sound > Personal mode settings > AI
Equalizer.
Select On to enable intelligent equalizer adjustment
based on audio content and custom settings.
Custom AI Equalizer
Settings > Sound > Personal mode settings >
Custom AI Equalizer.
Press the arrows (up) or (down) to
adjust the level of AI Equalizer.
Placement
Settings > Sound > TV placement.
Select On a TV stand or On the wall to have best
sound reproduction according to the setting.
DTS Play-Fi
DTS Play-Fi Wireless Surround
Settings > Sound > DTS Play-Fi.
With DTS Play-Fi on your Philips Display, you can
connect to compatible speakers to stream audio
wirelessly to other rooms in your house.
Note: Settings for Multiroom Display Audio are not
available when connected to the DTS Play-Fi
Headphones app or playing music from the DTS Play-
Fi app.
To stream audio wirelessly to speakers, you will
need...
• Philips Android Smart Display that supports DTS
Play-Fi
• DTS Play-Fi compatible device
• DTS Play-Fi app on your Philips Display
• Mobile device such as your phone or tablet
• DTS Play-Fi app or DTS Play-Fi Headphones app
installed on your phone or tablet
• Wi-Fi network
Setup to connect DTS Play-Fi compatible device
1 - Download DTS Play-Fi app or DTS Play-Fi
Headphones app and install the App on your phone
or tablet.
2 - Use DTS Play-Fi app or DTS Play-Fi Headphones
app to search and setup DTS Play-Fi compatible
device. Make sure the DTS Play-Fi device is
connected with same Wi-Fi network of your display.
3 - On your Philips display, open the pre-installed
DTS Play-Fi app and select Connect Speakers to
search DTS Play-Fi compatible devices.
4 - When the DTS Play-Fi devices is successfully
connected with your display, you can select the
devices from device list and adjust the volume.
5 - Now you can start to stream audio from your
display to multiple DTS Play-Fi devices.
DTS Play-Fi Wireless Surround
With Play-Fi app on your display, you can set up
surround sound with display speakers, soundbar and
subwoofer.
1 - Launch DTS Play-Fi App on display.
2 - Move to DTS Play-Fi Wireless Surround tab and
select 'Begin Setup...'.
3 - Follow the on-screen instruction to set speakers
and DTS Play-Fi compatible devices as a surround
sound system.
DTS Play-Fi Home Theater
Experience immersive home theater audio with Play-
Fi wireless subwoofers, soundbars, front speakers,
surround speakers, or a Play-Fi receiver that powers
home theater speakers.
Play-Fi Speakers as Front Speakers
• You may output display audio to a pair of Play-Fi
speakers such as the TAW6205, TAW6505 or TAFW1.
• Display speakers will be muted when connected to
Play-Fi speakers.
• Use the Play-Fi app on display to set up the Play-Fi
speakers.
1 - Select Play-Fi Wireless Home Theatre
2 - Select Two as the Front Speakers
3 - Follow the setup wizard to complete the setup.
Setup Home Theater system with your display and
Play-Fi Speakers
1 - On Play-Fi app, select DTS Play-Fi Home Theater
> Setup > Connect Speakers to connect all of your
Play-Fi devices. If the devices are already connected,
you can select My speakers are connected... to go to
next step.
2 - Setup to assign the Front Speaker, Surround
Speakers, Subwoofer to connected Play-Fi devices.
The graphic on left side will show the positions of the
speakers.
3 - Suggest to use Display+ Two as it provides
31
Advertisement
Table of Contents
