Glossary - Toshiba SD1010KB Owner's Manual

Analogue audio:
An electrical signal that directly
represents sound. In contrast,
digital audio can also be an electrical
signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio:
The width of a TV screen relative to
it is height. Conventional TVs are 4:3
(i.e., the screen is almost square).
Widescreen models are 16:9 (the
screen is almost twice as wide as its
height)
AUDIO OUT jacks:
Jacks on the back of the DVD System
that send audio to another system (TV,
Stereo, etc.)
Bit rate:
The amount of data used to hold a
given length of music; measured in
kilobits per seconds, or kbps. Or, the
speed at which you record.Generally,
the higher the bit rate, or the higher the
recording speed, the better the sound
quality. However, higher bit rates use
more space on a disc.
Chapter:
Just as a book is split up into
several chapters, a title on a DVD
disc is usually divided into chapters.
See also Title.
Digital audio:
An indirect representation of sound
using numbers. During recording,
the sound is measured at discrete
intervals (44, 100 times a second for
CD audio) by an analogue-to-digital
converter, generating a stream of num-
bers. On playback, a digital-to-analogue
converter generates an analogue signal
based on these numbers. See also
Sampling frequency and Analogue
audio.
Disc menu:
A screen display prepared for
allowing of selection of images, sound,
subtitle, multi-angles etc. recorded on
the DVD.
®
DivX :
DivX is a codec (compression/de-
®
compression) that can compress
images to a very small amount of data.
®
Dolby Digital:
A system developed by Dolby
Laboratories that compresses
digital sound. It works with stereo
(2ch) or multi-channel audio.
®
DTS :
(Digital Theater System)
DTS is a Multi-channel surround
sound system, but it is different from
Dolby Digital. DTS format was devel-
oped by Digital Theater Systems, Inc.
JPEG:
(Joint Photographic Experts Group)
JPEG is a method of compressing
still image files. You can copy JPEG
files on CD-RW / R or DVD+R / RW
discs from a computer and play back
the files on this unit.
MP3:
(MPEG Audio Layer 3)
MP3 is a method of compressing
files. You can copy MP3 files on
CD-RW / R or DVD+R / RW discs from
a computer and play back the files on
this unit.
Multichannel:
DVD is specified to have each sound
track constitute one sound field. Multi-
channel refers to a structure of sound
tracks having three or more channels.
Parental control:
A function of the DVD to limit playback
of the disc by the age of the users
according to the limitation level in each
country. The limitation varies from disc
to disc; when it is activated, playback
will be prohibited if the software's level
is higher than the user-set level.
PBC (Video CD only):
(Playback Control)
This function enables you to play
back interactive software using a
menu screen. See also Title.

Glossary

PCM:
(Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can
play back sounds as realistic as
possible by converting even com-
pressed Dolby Digital and MPEG
audio to PCM.
Region code:
Regions associate discs and
players with particular areas of the
world. This unit will only play back
discs that have compatible region
codes. You can find the region code
of your unit by looking on the rear
panel. Some discs are compatible
with more than one region (or all
regions).
Sampling frequency:
The rate at which sound is
measured by a specified interval to
turn it into digital audio data. The
number of samples in one second is
defined as the sampling frequency.
The higher the rate is, the better the
possible sound quality.
Title:
(DVD)
A collection of chapters on a DVD.
See also chapter.
(Video CD)
The contents of a Video CD. When
playing back a Video CD with the
PBC function, the title menu will
appear automatically.
Track:
Audio CDs and Video CDs use
tracks to divide the contents of a
disc. The DVD equivalent is called a
chapter. See also Chapter.