Picture Position; Pc Settings For Rgb/Pc Connections - Picture Position, Clock Phase, Sampling Clock, Reset; Clock Phase - Toshiba 42RV635DB Owner's Manual

PC settings for RGB/PC connections – picture
position, clock phase, sampling clock, reset

Picture Position

Connect the PC (as shown in the 'Connecting a PC via
RGB/PC' section) and ensure that a picture is showing on
the television screen. The picture position may now be
adjusted to suit personal preference.
Press to select PC, then select PC Setting
B
1
from the SET UP menu.
SETUP
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
PC Settings
Press OK. Press
f
2
then or to adjust the settings.
z x
PC Settings
Horizontal Position
Vertical Position

Clock Phase

Sampling Clock
Clock Phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
phase.
Use or to adjust until the picture clears.
z x
3
UK
Antenna
and to select an option,
e
0
0
0
0
Reset
until PC Setting is
e
to highlight Clock
e
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
clock.
PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Use
z
3
NOTE: The screen may be momentarily disrupted
when adjusting PC settings. The default settings
and adjustment ranges may vary depending on
the input signal format.
To return to the original factory settings.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Press OK.
3
PLEASE NOTE
When a PC is connected using HDMI none of
these functions will be available.
39
Sampling Clock
until PC Setting is
e
to highlight Sampling
e
0
0
0
0
Reset
or to adjust until the picture clears.
x
Reset
until PC Setting is
e
to highlight Reset.
e