Recording Setup - Toshiba 32SL863B Owner's Manual

Recording Setup

You can set your preferences for recording or for scheduling
recording.
To set the recording time for One Touch Recording
a
C c
Press MENU / to highlight Setup icon.
b
B b
Press or to highlight Preferences icon and press
OK.
c
B b
Press or to select Recording Setup and press
OK.
Preferences
Recording Setup
Camera Sensor Setup
Personal TV Setup
REGZA-LINK Setup
Network Setup
Network Device Setup
Photo Frame Setup
Teletext
d
B b
Press or to select One Touch Recording Time
and press OK.
Recording Setup
Recording Device
One Touch Recording Time
Start Padding Time
End Padding Time
e
C c
Press or to select the recording time.
You can set the Programme End Time in 30-minute
increments in the range of 30 minutes to 360 minutes.
To set the padding time for programmed
recording start time and end time.
a
B b
Press or to select Start Padding Time on the
Recording Setup screen.
b
C c
Press or to select a time.
You can select from None, 1 minute, 3 minutes, 5
minutes and 10 minutes. Recording will start at the
selected number of minutes prior to the recording
start time.
c
B b
Press or to select End Padding Time from the
Recording Setup menu.
d
C c
Press or to select a time.
You can select from None, 1 minute, 3 minutes, 5
minutes and 10 minutes.
Recording will end at the recording end time plus the
selected number of minutes.
Auto
Programme End Time
None
None
55
Setting USB HDD Energy-Saving Mode
a
B b
Press or to select Recording Devices from the
Recording Setup screen and press OK.
b
B b
Press or to select Device Energy-Saving Mode.
Recording Devices
Device List
Device Energy-Saving Mode
c
C c
Press or to select Normal or Energy Saving.
NOTE:
• When set to Energy Saving, it may take a while for the USB
HDD to function.
• When set to Energy Saving, depending on the type of USB
HDD, the USB HDD indicator lamp may not indicate standby
status even when in standby status.
To change the name of the USB HDD
a
B b
Press or to select Recording Devices from the
Recording Setup screen and press OK.
b
B b
Press or to select Device List and press OK. The
Device List screen will appear.
Device List
Device Name
USB HDD 1
c
Press the GREEN button.
Edit the desired name by using the software
keyboard. (See page 47) The maximum number of
characters is 25.
NOTE: If multiple USB HDD appear on the Device List screen
B b
in Step 2, press or to select the USB HDD whose name
you want to change.
To perform a USB HDD operation test
a
Press the YELLOW button on the Device List screen.
USB HDD operation test will start.
Wait until the test ends.
NOTE: The results of the device test are only a guide.
The device may not function as shown in the results.
CONTROLS AND FEATURES
Normal
Registered Connected