Door Reversibility / Child Safety Lock - Whirlpool AWZ 7913 WP Instructions For Use Manual

DOOR REVERSIBILITY / CHILD SAFETY LOCK

Door Reversibility
A. Unplug the dryer.
B. Open the door.
C. Using a spanner, turn the contact pin in the upper part of the door
by 90° and remove it.
D. Unscrew the 2 screws of the door hinge and remove the door.
E. Removing the door lock:
Unscrew the 2 screws above and below the door lock system.
Lift the door lock from the bottom, sliding it upwards about
1.5 cm, and remove it.
F. Reverse the door:
Fasten the door on the desired side with the 2 screws.
Take care to screw in horizontal position to avoid pinching of the seal.
G. Insert the door lock system on the opposite side of the hinge
fixation and push it down 1.5 cm.
H. Fix the 2 screws above and below the door lock system.
I. Take care not to reverse the sense of the door lock system.
The child safety must be above the locking mechanism.
J. Replace the contact pin in the inside of the door (top).
Child Safety Lock
How to use the child safety lock
1. Open the door.
2. Using a coin or a screwdriver, turn the plastic screw (I) clockwise 90°.
Slot vertical: the door cannot be locked.
Slot horizontal: the door can be locked.
C
C
D
E
I
E
9