Table of Contents
Advertisement
nanoe™ X Function
„„ Internal Cleaning Operation
When cooling or dry operation stopped, internal drying and nanoe™ X circulation airflow is activated in order to inhibit the mold
proliferation inside the unit (airflow passage, fan, heat exchanger). Mold proliferation or inhibition of mold growth can be different
due to the installation circumstances or operating hours.
Internal drying of inside unit
Fan rotation and internal dehumidifying
Operating conditions and operating hours
z
z
Operates in cooling or dry mode for more than 5 minutes. When finished, the internal cleaning operation is started. Drives for
about 75 minutes maximum.
The figure at right shows the display during the internal cleaning operation.
z
z
If you wish to resume operating during internal cleaning, press
„
CZ-RTC5B
room A
Cleaning the inside of air
conditioner with
Press
[
]
[
]
START
„„ „ T o stop the internal cleaning operation
Press
/
W hen the internal cleaning operation finished and stopped, the remote control display shows at right.
z z z
CZ-RTC5B
room A
[
]
START
NOTES:
Internal cleaning function is not possible to use any remote controller other than that of nanoe™ X function.
z
z
When connected to the remote controller which is adaptable to the nanoe™ X function, the internal cleaning function is set
z
z
to work automatically. If you wish to set to OFF, refer to the operating instructions for the remote controller which is adaptable
to the nanoe™ X function. If you wish to set the internal cleaning function to OFF with CZ-RTC6 series remote controller, use
Panasonic H & C Control App. This app is compatible with the following remote controllers.
Check the model number shown in the label on the bottom of the remote controllers.
Models : CZ-RTC6BL / CZ-RTC6BLW (CZ-RTC6 incompatible)
CZ-RTC6WBL / CZ-RTC6WBLW (CZ-RTC6W incompatible)
In case that the operation time of the air conditioner is less than 5 minutes, the internal cleaning operation cannot be
z
z
performed.
While the internal cleaning operation is running, the indoor temperature may occasionally increase.
z
z
10
Internal Cleaning Function
20:30 (THU)
.
Press
to finish.
.
20:30 (THU)
Internal Cleaning Operation
CZ-RTC6 series
[
]
[
Press
to finish
to finish
CZ-RTC6 series
nanoe™ X cycle of inside unit
Fan rotation and nanoe™ X internal circulation
/
.
]
Advertisement
Table of Contents
