With Latch - Graco ARGOS 65 Owner's Manual

11.3 With LATCH

NOTE: Some vehicle manufacturers have lower
maximum weight ratings for LATCH anchors, so you
must consult your vehicle owner's manual or call the
vehicle manufacturer to confirm the limits on your
vehicle's LATCH anchors.
1. Unhook LATCH from storage bars on the sides of
the seat. For ease of installation, extend LATCH to its
maximum length.
2. Place the child restraint firmly against the back of a
forward-facing vehicle seat.
3. Hook LATCH Connectors to vehicle lower
anchors
. Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt
5. If you need to remove LATCH to readjust,
push button on LATCH buckle
.
to loosen strap.
34
Do not install by this method for a child
weighing more than 45 lb (20 kg).