Samsung DW6 R705 Series User Manual page 326

Installation
STEP 5 Install the custom panel (For Fully Built-In and Semi Built-In models)
FBI (Fully Built-In, DW6*R70**BB) models
Ø2
B
22 English
DW7500RM_DD81-02968C-04_DA+SV+NO+FI+EN.indb 22
A
A
B
1. Put the installation template on the
back of the custom panel and fix it
temporarily using transparent tape. Note
that the rear of the custom panel will be
attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 3 kg and
7 kg.
• Thickness of the custom panel is
maximum 20 mm.
2. Mark 14 points guided on the
installation template.
3. Remove the installation template, and
then tighten the custom panel fixers (A)
with 2 screws (B, Ø3.5 X 25) as shown in
the figure.
2022-10-06 6:20:23