NEC E988 User Manual page 78

Schedule
Schedule
Sleep Timer*
Current Time settings
Year
Month
Day
Time
Schedule settings*
Settings
Power On
Power Off
Every Day
Every Week
Mon - Sun
*: A countdown message appears before entering power save mode or power off.
Sets the time until the monitor turns off automatically.
Off, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180
minutes, 240 minutes can be selected.
Sets the current date and time.
If the monitor remains for about two weeks or more with the power cord


NOTEE:
unplugged, the clock will not show the correct time.
In this case, set the [Current Time settings] again.
Sets the current year. Press the p or q button on the remote control to cycle to the current
year. Press the OK button to apply the change.
Sets the current month. Press the p or q button on the remote control to cycle to the current
month. Press the OK button to apply the change.
Sets the current day of the month. Press the p or q button on the remote control to cycle to
the current day. Press the OK button to apply the change.
Sets the current time. Select the hour field, then press the p or q button on the remote control
to cycle to the current hour, then repeat this for the minutes field. Press the OK button to apply
the change.
The monitor's clock is a 24-hour format.


NOTEE:
Creates a working schedule for the monitor (see
Press the p, q, t, u buttons to navigate and change the schedule settings. Press the OK
button on the remote control to select settings.
Select the number and press the OK button to activate the schedule. The circle next to the
number has an outline when the schedule is enabled. Up to 7 schedules can be created and
enabled.
Press the t or u button to cycle through schedule numbers.
Sets the monitor's power state for the schedule. Select [Power On] if you want the schedule to
turn the monitor on at the specified time. Select [Power Off] if you want the schedule to turn the
monitor off at the specified time.
Set the time for the schedule.
Select this option to have the schedule repeat every day.
When [Every Day] is selected, [Every Week] and [Mon - Sun] cannot be set.


NOTEE:
Enable or disables the option to have the schedule repeat every week.
- Repeat the schedule every week on the same day(s) of the week that you
Enable
select from [Mon - Sun].
- Execute the schedule one time on the specific day(s) you select from [Mon -
Disable
Sun].
Select this option if the schedule is only going to run on one day or it is an irregular schedule.
page
English - 75
44).