Remote Control; Extension Board; Interface Board - Sony VPH-G70Q Brochure & Specs

Multiscan projector with optional accessories
Hide thumbs Also See for VPH-G70Q:
Table of Contents

Advertisement

OPTIONAL ACCESSORIES FOR CONVENIENCE AND SYSTEM FLEXIBILITY
RM-PJ1000*
Infrared remote control unit
• Wired/wireless remote control unit for setup
and operation
• Full remote operation
• Function keys can be illuminated for opera-
tion in dark rooms
* Supplied with the VPH-G70Q/G70QM.
RM-PJ10
Infrared remote control receiver
• Remote control satellite for rear projection or
out-of-sight projector applications
• Extends the operating range of the
RM-PJ1000 and RM-PJM800
IFB Series Interface Boards can be
fitted in the VPH-G70Q/G70QM
Projector, the PC-1271/1271M
Signal Interface Switcher and the
IFU-1271/1271M Interface Unit.
IFB-21
Analog RGB input/output (HD D-sub 15-pin)
• RGB bandwidth of 150MHz

REMOTE CONTROL

RM-PJM800
Infrared remote control unit
• Wireless remote control unit for presentations
• Can also be used to control the PC-1271/
1271M
• Power on/off and input selection operation
• Computer mouse control when used with
RM-PJ20
RM-PJ20/21*
Mouse receiver
• Enables operation of a connected computer
with the RM-PJM800

INTERFACE BOARD

IFB-12
Analog RGB/Component (Y/R-Y/B-Y)/HDTV
(Y/P
/P
, GBR)/Y/C/Composite video input/out-
B
R
put* (5 x BNC)
• Functions as an input/output* board
• RGB bandwidth of 300MHz
* The IFB-12 can function as an output board
when fitted in the VPH-G70Q/G70QM.
IFB-30
Digital RGB input (D-sub 9-pin)
• Monochrome/8 color/16 color/64 color mode
switchable
• RGB bandwidth of 30MHz
1

EXTENSION BOARD

EXB-DS10
Extension board (internal line doubler board)
• Line doubler signal processing board
designed to be fitted in the
VPH-G70Q/G70QM
• Compatible with composite video, Y/C video,
component and 15kHz RGB signals
• Aperture is adjustable horizontally and verti-
cally to achieve crisp image reproduction
with any type of input signal
• Line doubler signal processing can be turned
ON and OFF via the remote commander or
control panel
• Moving image correction circuitry is incorpo-
rated for natural reproduction of line-doubled
fast-moving images
• Digital noise reducer incorporated
• Compatible with NTSC, PAL, SECAM,
NTSC
and PAL-M
4.43
• 3D comb filter or 3-line comb filter for NTSC
and 3-line comb filter for PAL signals to
reduce cross color and dot interference for
clear image reproduction
2
IFB-20*
Analog RGB input (D-sub 9-pin)
• RGB bandwidth of 120MHz
IFB-1000*
2
Composite/Y/C input (Loop-through BNC/
Loop-through Mini DIN 4-pin)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vph-g70qm

Table of Contents