Dual Sensing; Room Temp; Change Celsius To Fahrenheit °C~°F; Setting The Current Time - LG H12TN4 Owner's Manual

Dual Sensing

Press the "Dual Sensing" button, the appliance will
run in Dual Sensing mode.
Pressing the "Dual Sensing" button again will
cancel the mode, symbol
on the LCD screen.
This function enable the remote control to measure
the temperature at its current location and send
this signal 7 times in 2 hours to the air conditioner
to enable the air conditioner to optimize the
temperature around you and ensure maximum
comfort.
It will automatically deactivate 2 hours later.
In Dual sensing mode, the temperature a, the
speed b and the direction of the air flow c can be
adjusted by pressing the buttons indicated.
Advice to put the remote controller in the place
where the indoor unit receive signal easily.
Dual
Sensing
Mode
Energy
Saving
Swing
Sleep
Timer
22
will no longer be shown
Light
Off
Fan
Speed
Temp.
Jet
Mode
Room
Temp
Swing
(5 s)
SET UP
Func.
Set
Cancel

Room Temp

Room temperature is displayed about 5 seconds if
you press Room Temp. button.
Change Celsius to
Fahrenheit °C~°F
Press Room Temp. button for 5 seconds.
• Repeat the same process to change again.

Setting the Current Time

1
Insert batteries (reinsert a battery if already
inserted/or use the reset button).
• The icon below blinks at the bottom of the
display screen.
2
Press e or f button to select the time.
3
Press Set/Cancel button to finish.
NOTE
• The On/Off Timer is available after setting the
current time.
EN