Behringer RD-8 Quick Start Manual

Behringer RD-8 Firmware
Version 2.0.4 (09 Nov 2020)
Bug Fixes:
1. Fixed the issue where MIDI out notes of note repeat were fixed to repeat 8.
2. Fix issue that adjusting swing value while playing may affect MIDI and TRIG SYNC.
3. Improved pattern auto-save. All the below pattern changes will now be auto saved with
STEP RECORD on:
3.1. Step on/off by pressing STEP button
3.2. Press TRIGGER to set step on when playing
3.3. Note repeat live record
3.4. Set step on/off in RAND setting menu
3.5. Press STEP in pattern length setting
3.6. Sweep erase by Hold + VOICE button
3.7. Erasing all steps of selected voice by ERASE + VOICE button
3.8. Step copy 1-16 to 17-32 etc
New features:
1. Lights off for the disabled voice of MUTE/SOLO/BUS SEND, when enabled they turn to
solid red/white/pink.
2. Set step off steps to on when in note repeat live recording.
3. Use the 4 red LEDs (1, 2, 4, 8) above the note repeat buttons to show which note repeat value is
recorded on a step depending on the voice selected.
4. Add sweep erase function, when playing in STEP MODE, hold TAP/HOLD then press voice button
to remove steps from pattern.
5. When in STEP RECORD mode, hold ERASE then press voice button to delete all steps of the voice
in pattern.
6. Support pattern changing to different songs while playing.
6.1. Enter SONG MODE
6.2. Hold TAP/HOLD button
6.3. Select Song with step button (1-16) to go to after current pattern has finished
musictribe.com behringer.com