JVC Everio GZ-RX500 User Manual page 85

5
Tap "EXECUTE".
.
The number of discs required to copy the files is displayed.
0
Prepare the discs accordingly.
6
Tap "AUTO" or "BY DATE". (A mode only)
.
When "AUTO" is selected, videos with similar recording dates are
0
displayed in groups.
When "BY DATE" is selected, videos are displayed according to
0
recording dates.
7
Tap "EXECUTE".
.
When "INSERT THE NEXT DISC TO CREATE OR PRESS STOP TO
0
EXIT" appears, change the disc.
8
Tap "OK" when "COMPLETED" is displayed.
.
9
Close the LCD monitor of this unit to turn off this unit and disconnect the
USB cable.
Caution :
If you copy many images at once, it may not be possible to create the disc
0
halfway through the process. If the volume of the image data is large, copy
the data in several times.
Do not turn off the power or remove the USB cable until copying is
0
complete.
Files that are not on the index screen during playback cannot be copied.
0
Special files cannot be copied either.
If the created BD-R/BD-RE is played back on a Blu-ray recorder, your Blu-
0
ray recorder may disable additional recording on the BD-R/BD-RE. In this
case, files cannot be added to the disc.
If you stop the process of creating the disc at the screen for creating disc,
0
the disc in use for writing cannot be used again.
Memo :
To check the created disc, refer to ""Playing Back with a BD Writer
0
(External Blu-ray Drive)" (A p. 88) ".
"Playing Back with a BD Writer (External Blu-ray Drive)" (A p. 88)
Copying
85