Table of Contents
Advertisement
19
Keystone
Adjusts image distortion caused by tilting projection.
Auto Keystone
Off: Manually adjusts vertical image.
On: Automatically adjusts vertical image.
H. Keystone
Press the
and makes a squarer image.
V. Keystone
Press the
makes a squarer image.
4 Corner Correction
Manually adjusts the shape and size of an image that is unevenly
rectangular on all sides.Press four directional selection key to select the
cornerand then press "ENTER" key that you wish to adjust. Press four
directional selection keys to adjust the image shape.
Reset
Reset to defalut keystone setting.
Image Shift
•
Signal
H. Position (Horizontal position)
•
•
V. Position (Vertical position)
•
•
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
or
button to adjust image distortion horizontally
or
button to adjust image distortion vertically and
Image Shift: Shifts the projected image by pressing
.
Press
to move the image left.
Press
to move the image right.
Press
to move the image down.
Press
to move the image up.
Advertisement
Table of Contents
