Parts And Features; Before First Use - Koolatron TOTAL Chef TCPUSBB600 Series User Manual

PARTS AND FEATURES

pop-up spout cover
spout
spout cover
release button
spout cover
lock
BLENDING JAR
anti-slip
ring
BOTTOM COVER
SPILL-PROOF LID
carrying loop
carrying strap
USB CHARGING CABLE
safety interlock arrow
power /
pulse
button
RECHARGEABLE BLENDER BASE
4
READ THESE INSTRUCTIONS THOROUGHLY AND SAVE FOR FUTURE REFERENCE.
• Carefully unpack the blender from its packaging and check that all parts are present. Remove any
promotional labels but do not remove the safety interlock arrow sticker. Safely dispose of plastic bags
or small pieces that could present a suffocation or choking hazard.
NOTE - The blending blades are extremely sharp. Use extreme caution and avoid contact with cutting
edges when handling and cleaning the blades.
• Wipe the blender base with a clean, damp cloth to remove any dirt or dust. Do not immerse
the blender base or USB-C charging cable in any liquid. Carefully wash the blending jar, lid, and
bottom cover in warm water with a mild dish detergent, rinse, and dry thoroughly. Do not use
abrasive cleansers or scouring pads.
• Assemble the blender and plug the charging cable into a USB power adapter or power bank. Charge
for approximately 3-5 hours until fully charged.
1. Carefully place the blending jar on the blender base and rotate clockwise until the safety interlock
arrow is directly over the power button.
2. Fill the blending jar no higher than the MAX marking with small pieces of solid ingredients such as
fresh or frozen fruits and vegetables, ice cubes, or yogurt.
3. Add liquid ingredients such as juice, water, kefir, or milk to the blending jar up to the 600 mL
marking.
4. Place the lid on the jar and rotate clockwise until the spout lock is aligned over the power button.
Tilt the blender gently from side to side to make sure no ingredients are stuck under the blades.
5. Blend, gently tilting the blender from side to side as needed to help combine the ingredients.
6-point
stainless
BLEND MODE - Press the power button once to start the blending cycle. The power button will
steel blade
illuminate and all of the green LED indicators will flash as the blender runs continuously. After 30
seconds the blending cycle will end and the blender will automatically shut off. Pressing the power
button at any time during the cycle will pause operation; once paused the blender will automatically
shut off after 5 seconds of inactivity.
indicator
lights
PULSE MODE - Press the power button twice to enter pulse mode. Yellow LED indicators will flash
on alternating sides for 1-2 seconds and then stay on. While the yellow LEDs are on, press and hold
the power button to blend for up to 30 seconds and release to stop. After 5 seconds of inactivity,
USB-C
pulse mode will automatically end and the blender will shut off.
charger
port
6. Your portable blender comes with a bottom cover that lets you use the blending jar as a lightweight
travel cup. To use, blend your smoothie or shake and then turn the blender upside down, carefully
unscrew the base and set aside. Place the cover on the blending jar, rotate clockwise to tighten, and
turn the jar right-side up.

BEFORE FIRST USE

USING YOUR PORTABLE BLENDER
5