Attwood 11401-4 Instruction Sheet

Pontoon Storage Block Set
Instruction Sheet 69536 RevA 5/14
READ AND SAVE THESE INSTRUCTIONS
WARNING
THIS PRODUCT IS NOT INTENDED FOR USE BY CHILDREN
WARNING
This product contains a chemical known to the state of California to
cause cancer and birth defects and other reproductive harm.
Description Quantity
- Pontoon storage block 1 - Set (4 individual blocks)
- Instruction Sheet 1
Remove all parts from packaging. Verify that all parts are present
prior to use.
WARNING
• Read all instructions thoroughly prior to use.
• This product is designed specifically for pontoon storage only.
• The pontoon storage blocks are not designed to be used
stacked together.
• Ensure that proper precautions are taken to prevent unlevel
loading of the storage blocks.
• Use caution at all times when trailering, loading and unloading
your boat.
• Examine components periodically to ensure that the storage
blocks show no sign of wear or degradation and are in good
working order. Discontinue use immediately if any signs of wear
or degradation exist.
• Check with your manufacturer for recommendations on the
number and locations of pontoon storage blocks to be used under
your type and length of pontoon tubes to provide proper support.
(If you have a three tube type pontoon the center tubes will need
to be supported as well.)
• Failure to follow these instructions and warnings could result in
injury and/or death.
Instructions for use:
Congratulations on purchasing the Attwood Pontoon Storage Block
Set. This unique product has been designed to give you years of
worry free storage for your pontoon. The lightweight yet strong
supports are engineered to provide stable, secure seasonal storage.
Attwood's Pontoon Storage Blocks are not only rugged, but also UV
and moisture resistant.
©2014 Attwood Corporation 1016 North Monroe Lowell, MI 49331
#11401-4
1. Determine location for the storage of your pontoon. The location
should be level and on stable ground that will support the weight of
your craft while not allowing the supports to "sink" into the soil.
2. As in any storage location, make sure your pontoon has plenty of
clearance from any building or landscaping to avoid damage to
property or to your craft from storing under eaves of building or
possible dropping branches, etc.
3. Simply place your pontoon in your chosen location and locate
the blocks at the desired positions. Please note the positioning
and spacing of the blocks will depend on the size and style
of your pontoon. Check with your pontoon manufacturer for
recommendations on spacing and number of Pontoon Storage
Blocks to utilize for your pontoon.
4. Place your pontoon on to the blocks (4000lb max each) and make
final adjustments if required to assure a secure and stable loading
on the blocks.
5. It is recommended that normal measures are taken to properly
secure the pontoon down to prevent movement of the craft while
in storage.
Care and Maintenance:
To ensure years of use please follow these simple recommendations
for cleaning and storing your Attwood Pontoon Storage Blocks.
1. Clean and wash off the pontoon blocks with a garden hose to
remove soil and dirt from the surface of the blocks.
2. Allow to thoroughly dry.
3. Inspect and examine blocks to ensure they show no signs of wear
or degradation and are in good working order. Discontinue use
immediately if any signs exist.
www.attwoodmarine.com