Table of Contents
Advertisement
Running the first programme
Open the stopcock.
Turn the programme selector to Cot-
tons.
The washing machine is now switched
on and in the control panel, the temper-
ature 60 °C lights up.
Touch the Start/Stop sensor.
The programme will start and the
symbol lights up in the control panel.
After 10 minutes, the indicators dim
and the Start/Stop sensor starts
flashing.
After the end of the programme
At the end of the programme, the anti-
crease phase is switched on. The
symbol lights up in the control panel;
: appears in the time display and
the drum occasionally rotates.
Touch the Start/Stop sensor.
The door will unlock.
Reach under the door grip and pull
the door open.
Before using for the first time
Tip: Leave the door slightly open to al-
low the drum to dry.
After the end of the programme, turn
the programme selector to .
The washing machine is switched off
again and is now ready for use.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.
17
Advertisement
Table of Contents
