Philips 6102 Series User Manual page 47

HDMI Ultra HD
This TV can display Ultra HD signals. Some devices,
connected via HDMI, do not recognize a TV with Ultra
HD and might not work correctly or might show
distorted picture or sound. To keep such devices from
malfunctioning, you can set the signal quality to a
level that the device can handle. If the device is not
using Ultra HD signals, you can switch off Ultra HD for
this HDMI connection.
The setting UHD 4:4:4/4:2:2 allows UHD YCbCr 4:4:4
/ 4:2:2 signals. The setting UHD 4:2:0 allows UHD
YCbCr 4:2:0 signals.
To set the signal quality...
1 - Press  , select General settings and
 (right) to enter the menu.
press
2 - Select HDMI Ultra HD > HDMI 1 & 2 and
press OK.
3 - Select UHD 4:4:4/4:2:2, UHD
4:2:0 or UHD Off and press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
USB keyboard settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected...
1 - Press  , select General settings , and
press  (right) to enter the menu.
2 - Select USB keyboard settings, and press OK to
start the keyboard setup.
Mouse settings
To adjust the motion speed of the USB mouse....
1 - Press  , select General settings , and
press  (right) to enter the menu.
2 - Select Mouse settings, and press OK to start
the mouse speed setup.
Home or Store
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Store location...
1 - Press  , select General settings , and
press  (right) to enter the menu.
2 - Select Location > Store, and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Store, you can set the availability of
a specific demo for in store use.
1 - Press  , select General settings , and
press  (right) to enter the menu.
2 - Select Shop setup and press  (right) to enter
the menu.
3 - Select banner, and select Commercial banner
or Promotional banner as in store demo.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Factory settings
You can set the TV back to the original TV settings
(factory settings).
To switch back to the original settings...
1 - Press  , select General settings and
press  (right) to enter the menu.
2 - Select Factory settings and press OK.
3 - Press  (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo the full TV installation. The TV is
completely reinstalled.
To redo the full TV installation...
1 - Press  , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
47