Table of Contents
Advertisement
External Equipment
Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.
■
Condition
•
Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"
•
Connect the equipment to this unit's AV2 or AV3 terminal via a "fully-wired" SCART cable. (p. 28)
•
Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). (p. 16)
■
Download analogue channel settings
•
Perform Auto setup. (p. 20)
When fi rst using this unit, see "Auto Setup". (p. 9)
•
Perform download to the equipment. (p. 20)
■
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
Direct TV Recording:
Recording the current programme in VCR / DVD recorder immediately.
DIRECT
TV REC
What you
see is
What you
EXIT
record
Information
Recording information or if recording is not possible, a message is displayed.
/ Message
(Only when the programme number is "0" or "AV mode" for some equipment.)
Power
Insert a videocassette or DVD in the recording equipment and it is operated, TV
on link
is turned on and input mode is switched automatically so that you can view the
and Easy
content. (Only when TV is in Standby mode.)
playback
Power off
When TV is set to Standby mode, the recording equipment is also automatically
link
set to Standby. (Only when the videocassette or DVD is not active.)
• "DATA LOGIC" (a trademark of Metz Corporation)
• "Easy Link" (a trademark of Philips Corporation)
Read the manuals of the equipment too.
26
Q-Link
•
When Direct TV Recording is performed, the
DIRECT
recording equipment is automatically turned on if it
TV REC
is in Standby mode.
•
The recording equipment is recording from its own
tuner. You can turn the TV off during recording
(Analogue only).
•
Do not turn the TV off during recording AV source.
Otherwise the recording will be stopped.
•
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. (but not for the Analogue channel.)
■
To change DVB channel, stop recording
EXIT
• "Megalogic" (a trademark of Grundig Corporation)
• "SMARTLINK" (a trademark of Sony Corporation)
Control with HDMI "
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Player
theatre, Panasonic Amplifi er, etc.) allow you to enjoy the easy playback or home theatre.
About connections, see "Connections" (p. 29). Read the manuals of the equipment too.
Non-HDMI-compliant cables cannot be utilized.
About applicable equipments, consult your local Panasonic dealer.
After connections turn the equipments on and then, switch the TV unit on.
1
Display the menu
MENU
OK
2
Select "Setup menu"
MENU
Mai n me nu
Home thea tre
P ic ture me nu
Sound menu
S etup men u
Select "Control with HDMI"
3
Setup menu
Q-Link
AV2 out
Control with HDMI
Teletext
Off timer
Text language
Side panel
Power save
Tuning menu
System language
Shipping condition
4
Select "On" (default is On)
IDTV
Easy
Automatic Input switching-When the connected Panasonic equipment is operated, input
playback
mode is switched automatically. When it is stopped operating, input mode is returned.
You can control the theatre speaker with TV's remote control.
This function is available when Panasonic Amplifi er or Player theatre is connected.
MENU
Display the menu
Select "Home theatre" or "TV speaker"
M ai n me nu
Theatre
H ome t he at re
speaker
Pict ure menu
Sound me nu
Set up me nu
•
When selecting "Home theatre", the sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
Power on
When the connected Panasonic equipment is operated, TV is also automatically
link
turned on and the content is reproduced. (Only when TV is in Standby mode.)
Power off
When TV is set to Standby mode, the connected Panasonic equipment is also
link
automatically set to Standby.
Control" ∗
next
select
AV2
Monitor
On
select
TOP
Off
West
Off
Off
select
■
Home theatre:
Adjustment for equipment (automatically
turned on if it is in Standby mode)
next
Volume up / down
select
Mute
■
TV speaker:
TV speakers are active.
27
Advertisement
Table of Contents
