Programming - Siemens CP 343-1 Lean Manual

Requirements for use

3.3 Programming

Installatio of the support package
● STEP 7 V5.5
● STEP 7 Professional V11
Downloading configuration data
It is possible to download the configuration data to the CP via MPI or LAN/Industrial
Ethernet.
GSDML file for configuration in third-party systems
You will find the GSDML file for the CP described here on the Internet under the following
entry ID (entry type "Download"):
19698639 (http://support.automation.siemens.com/WW/view/en/19698639)
3.3 Programming
Program blocks
For some communications services, there are preprogrammed program blocks (FCs / FBs)
available as the interface in your STEP 7 user program.
Please note the documentation of the program blocks in the online help of STEP 7 or in the
manual /10/ (Page 62).
Note
Current block versions
We recommend that you always use the latest block versions for all module types.
You will find information on the current block versions and the current blocks to download
from the Internet in our Customer Support area under entry ID:
8797900 (http://support.automation.siemens.com/WW/news/en/8797900)
With older module types, this recommendation assumes that you are using the latest
firmware for the particular module type.
24
Install the HSP in STEP 7 / HW Config with the "Options" > "Install Hardware Updates"
menu command.
You will find further information in the STEP 7 online help (under "HSP" or "Hardware
update"). After installing the HSP, close STEP 7. After restarting STEP 7, the CP is in the
catalog of HW Config.
Install the support package in STEP 7 using the menu command "Options" > "Support
packages".
The information system of STEP 7 will provide you with information (keyword "Support
Packages" or Installing Support Packages"). After installing the support package, close
STEP 7. After restarting STEP 7, the CP is in the catalog.
Manual, 10/2012, C79000−G8976−C198−07
CP 343-1 Lean