Tips on economical use
Always fill the appliance with the
■
maximum amount of laundry for
each programme. ~ Page 28
Wash normally soiled laundry
■
without pretreating.
For light and normal soiling in
■
laundry, you can save energy and
detergent.
The selectable temperatures apply
■
to the care labels on the textiles. The
temperatures in the appliance may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
Sleep mode: If the appliance is not
■
operated for a prolonged period
(approx. 5 minutes), the display
panel lighting goes out before the
programme starts and after the
programme has ended, A flashes.
Touch any area of display panel to
activate the display backlighting.
When the programme is running,
most of the display panel lighting
goes out. Touch any area of display
panel to re-activate the lighting.
Automatic switch off: If the
■
appliance is not operated for a
prolonged period (approx. 20
minutes), it will automatically switch
off (depending on the water level
inside of appliance) before the
programme starts and after the
programme has ended. Press the
power button # again to switch on
the appliance.
If the laundry is then dried in the
■
appliance, select the maximum
possible spin speed. The less water
the laundry contains, the less time
and energy are required for drying.
Do not dry dripping wet laundry.
Positioning and connecting
5
Positioning and
connecting
S tandard accessories
P o s i t i o n i n g a n d c o n n e c t i n g
Check the appliance for transport
Note:
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
en
13