Planet GS-5220 User Manual page 326
L3 gigabit/10 gigabit managed poe switch
Hide thumbs
Also See for GS-5220:
- User manual (568 pages) ,
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
• Hold Time
• RADIUS-Assigned QoS
Enabled
• RADIUS-Assigned
VLAN Enabled
• Guest VLAN Enabled
User's Manual of GS-5220 PoE Series Managed Switch
the client is still attached or not, and the only way to free any resources is to age
the entry.
This setting applies to the following modes, i.e. modes using the Port Security
functionality to secure MAC addresses:
■
Single 802.1X
■
Multi 802.1X
■
MAC-Based Auth.
If a client is denied access, either because the RADIUS server denies the client
access or because the RADIUS server request times out (according to the
timeout specified on the "Configuration→Security→AAA" page), the client is put
on hold in the Unauthorized state. The hold timer does not count during an
on-going authentication.
In MAC-based Auth. mode, the switch will ignore new frames coming from the
client during the hold time.
The Hold Time can be set to a number between 10 and 1000000 seconds.
RADIUS-assigned QoS provides a means to centrally control the traffic class to
which traffic coming from a successfully authenticated supplicant is assigned on
the switch. The RADIUS server must be configured to transmit special RADIUS
attributes to take advantage of this feature.
The "RADIUS-Assigned QoS Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned QoS Class functionality. When
checked, the individual ports' ditto setting determines whether RADIUS-assigned
QoS Class is enabled for that port. When unchecked, RADIUS-server assigned
QoS Class is disabled for all ports.
RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch. Incoming
traffic will be classified to and switched on the RADIUS-assigned VLAN. The
RADIUS server must be configured to transmit special RADIUS attributes to take
advantage of this feature.
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned VLAN functionality. When
checked, the individual ports' ditto setting determines whether RADIUS-assigned
VLAN is enabled for that port. When unchecked, RADIUS-server assigned VLAN
is disabled for all ports.
A Guest VLAN is a special VLAN - typically with limited network access - on
326
Advertisement
Table of Contents
