Table of Contents
Advertisement
Safety Instructions
Laser Printer Precautions
This printer uses laser technology. Follow the precautions below to ensure safe, efficient
operation.
❏ Unless specifically instructed in the printer's
documentation, be careful not to touch the
fuser, which is marked
CAUTION hot surface
the printer has been in use, the fuser may be
very hot.
❏ Do not attempt to modify or take the imaging
cartridge apart. It cannot be refilled.
❏ Do not touch the toner and avoid all toner
contact with your eyes.
❏ If toner is spilled, use a broom and dustpan or a
damp cloth with soap and water to clean it up.
Because the fine particles can cause a fire or
explosion if they come into contact with a
spark, do not use a vacuum cleaner.
❏ Do not dispose of used imaging cartridges in
fire, as they can explode and cause injury.
Dispose of them according to local regulations.
Important Safety Instructions
Read all of the following instructions before operating your printer:
When choosing a place and power source for the printer
❏ Place the printer near an electrical outlet where you can easily plug in and
unplug the power cord.
❏ Do not place the printer on an unstable surface.
❏ Do not put your printer where the cord will be stepped on.
❏ Slots and openings in the cabinet and the back or bottom are provided for
ventilation. Do not block or cover them. Do not put the printer on a bed, sofa,
rug, or other similar surface or in a built-in installation unless proper ventilation is
provided.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use the type of power source indicated on the label. If you are not sure of the
type of power available, consult your dealer or local power company.
CAUTION
. If
hot surface
Advertisement
Table of Contents
