Picture (In Pc Mode) - Dell 4310WX User Manual

HDMI—Use and
D P —Use
ISPLAY ORT
NOTE:
You cannot disable your current input source. At anytime, a minimum of
two input sources have to be enabled.

PICTURE (in PC Mode)

Using the Picture menu, you can adjust the display settings of your projector. The
Picture menu, provides the following options:
V —Allows you to optimize the display image: Presentation, Bright,
IDEO MODE
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings). If you adjust the settings for Brightness, Contrast,
Saturation, Sharpness, Tint, and Advanced, the projector automatically switches
to Custom.
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced the projector automatically switches to Custom.
B —Use
RIGHTNESS
C —Use and
ONTRAST
A —Press
DVANCED
ADVANCED" on page 37.
Get other manuals https://www.bkmanuals.com
to enable or disable HDMI input.
and to enable or disable DisplayPort input.
to
and adjust the brightness of the image.
to adjust the display contrast.
to activate Picture Advance Menu. See "PICTURE
Using Your Projector 35