Table of Contents
Advertisement
È Insert the fuel tank breather hose into the hole in
the steering stem cap.
É Pass the oil tank breather hose on the outside of
the AC magneto lead, neutral switch lead, light
switch lead, wire harness, starter motor lead, neg-
ative battery lead and cylinder head breather
hose.
Ê Fasten the diode and rectifier/regulator lead, with
the diode at its white tape and the rectifier/regula-
tor lead at its protecting tube.
CABLE ROUTING DIAGRAM
Ë Fasten the wire harness, starter motor lead and
negative battery lead so that the plastic locking tie
ends do not contact the ignition coil lead.
Ì Fasten the wire harness, rectifier/regulator lead,
coolant reservoir hose, hot starter cable, negative
battery lead and starter motor lead.
Í Fasten the wire harness, negative battery lead,
starter motor lead, rectifier/regulator lead and
coolant reservoir hose at the white tape for the
negative battery lead.
2 - 21
Get other manuals https://www.bkmanuals.com
SPEC
Advertisement
Table of Contents
