Installing The Base Cover; Battery; Removing The Battery - Dell Precision 3530 Service Manual

Installing the base cover

1 Align the base cover with the screw holders on the laptop .
2 Press the edges of the cover until it clicks into place.
3 Tighten the M2x5 screws to secure the base cover to the laptop.
4 Follow the procedure in

Battery

Removing the battery

NOTE: A 6-cell 92WHr battery has 2 screws.
1 Follow the procedure in
2 Remove the base cover.
3 To remove the battery:
a Disconnect the battery cable from the connector on the system board [1].
b Loosen the M2.5x5 captive screw 2 that secures the battery to the laptop [2].
c Lift the battery away from the laptop chassis [3].
16 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.