Table of Contents
Advertisement
operating instructions, tips
Digital Graphic
2
Display
Dry Level
3
Selection Button
Temp Selection
4
Button
DC68-03170J-17_IB_DV7000H_EN_R.indd Sec6:24
DC68-03170J-17_IB_DV7000H_EN_R.indd Sec6:24
SANITIZE – Sanitizes garments by infusing high temperature heat deep into the fabric
during the drying cycle. Use this cycle to keep your bedding and curtains clean through
sanitization.
DELICATES – The Delicates cycle is designed to dry heat-sensitive items at a low drying
temperature.
TOWELS (DV48(5)H7400E(G)*, DV45H7200E(G)*) – To dry bath towels and similar items.
PERM PRESS – Dry wrinkle-free cottons, synthetic fabrics, knits, and permanent press
fabrics automatically.
QUICK DRY – Provides a 30 minute drying cycle.
TIME DRY – Time Dry allows you to select the desired cycle time in minutes.
Turn the Cycle Selector dial to Time Dry, and then press the Adjust Time up arrow to set the
drying time. Press the arrow repeatedly to scroll through the time settings.
REFRESH (DV48(5)H7400E(G)*) – Use to smooth out wrinkles and reduce odors in loads
of one to four items. In this cycle a small amount of water is sprayed into the dryer drum
after several minutes of tumbling with heat. Confi rm that the laundry load is dry.
AIR FLUFF (DV45H7200E(G)*) – The Air Fluff cycle tumbles the load at room temperature
air.
WRINKLE AWAY (DV48(5)H7400E(G)*) – Removes wrinkles from clothes stored in closets,
etc. It provides wrinkle release via optimized steam care.
For best results, load 2-3 items at once. You can extend the drying time by a minimum of 20
minutes , depending on the item type or load. Confi rm that the laundry load is dry.
WRINKLE RELEASE (DV45H7200E(G)* / DV45H7000E(G)* ) – The Wrinkle Release cycle
will release wrinkles from items that are clean, dry, and only slightly wrinkled, such as clothes
from a crowded closet, suitcase or items that have been in the dryer too long after the cycle
has ended. Wrinkle Release can be used with any temperature selection.
The display window shows the estimated time remaining in the cycle after you have
pressed the Start/Pause button. The estimated time remaining may fl uctuates as the cycle
progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate. When your dryer is in
the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, "End" (DV48(5)H7400E(G)* / DV45H7200E(G)*) / "0"
(DV45H7000E(G)* will appear in the display panel until you push
the Start/Pause button or the Power button.
If your dryer is paused during a cycle, the indicator lights will blink until you press the Start/
Pause button.
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press the Dry
Level button. An indicator light will illuminate next to the dryness level you selected.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads may
require the Very Dry or More Dry setting for complete dryness.
Damp Dry is designed to partially dry items. Use for items that lay fl at or hang to dry.
Temperature can only be adjusted in NORMAL and TIME DRY cycles.
To select the temperature for the load, press the Temp button. An indicator light will
illuminate next to the temperature you selected. Press the button repeatedly to scroll through
the settings.
High – For sturdy cottons or those labeled Tumble Dry.
Medium – For permanent press, synthetics, lightweight cottons, or items labeled Tumble
Dry Medium.
Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low (DV48(5)H7400E(G)*, DV45H7200E(G)*) – Provides the lowest heated drying
temperature possible.
English - 24
2023-06-30
2023-06-30
3:29:58
3:29:58
Advertisement
Table of Contents
