Table of Contents
Advertisement
Installation and connection
Building under a continuous work‐
top/ in a kitchen run
Building under kits* must only be in‐
stalled/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.
– A special building under kit* with a
cover plate to replace the machine lid
is required. It must be fitted by a suit‐
ably qualified fitter to ensure electri‐
cal safety. N.B. If there is space to
push the washing machine under the
worktop without removing the lid, the
building under kit is not necessary.
Otherwise it is essential.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in its final posi‐
tion.
Fitting instructions are supplied with the
conversion kit.
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate "WTV"
stacking kit* to match your dryer is re‐
quired.
All parts marked* are available from
your Dealer or Miele.
56
Please note:
a
Safety distance to wall at least 2
cm
b
Height:
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Advertisement
Table of Contents
