Retrofitting A Digital Receiver; Connecting A Micro Digital Receiver To A Television Set - Grundig Fine Art 37 LXW 94-9650 FHD Manual

12 VDC, 18 W max.
SERVICE
DVI-I HDMI
G-BUS

RETROFITTING A DIGITAL RECEIVER

Connecting a micro digital receiver
to a television set
You can retrofit your television with a micro digital receiver. Your
dealer can recommend an appropriate receiver for you.
The user guide for the receiver can be integrated into the television
user guide by following a brief installation procedure. After
installing, the receiver can be controlled with the television remote
control. The remote control, the infra-red mouse and the power sup-
ply for the receiver will then no longer be needed.
Connecting the communication line to the receiver
Plug the communication line into the
1
»12 VDC« sockets.
Note:
The communication line is supplied with the television.
Connecting the communication line to the
television set
Plug the communication line into the
1
socket on the television.
Note:
The remote control, the infra-red mouse and the power supply
for the receiver will then no longer be needed.
PIP
z
TXT TV-G
TV MHP A/B Radio
d
DR DVD
TV
Tele Pilot 766 S
»IR remote« and
»SERVICE
G-BUS«
29