Table of Contents
Advertisement
Instruction Manual
D104143X012
Parts Ordering
When corresponding with your
When ordering replacement parts, also specify the key number, part name, desired material, using the Parts List.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts Kits
Retrofit Kits for ENVIRO‐SEAL Packing
Retrofit kits are available for replacing the packing in an existing valve with an ENVIRO‐SEAL packing system. These kits
are available for single PTFE or graphite packing. All parts required for installation of the ENVIRO‐SEAL packing system
into an existing CL600 Control-Disk valve are included in the kits.
Worn shafts, packing box damage, or other components that do not meet Emerson finish specifications, dimensional
tolerances, and design specifications, may adversely alter the performance of the retrofit kit.
ENVIRO‐SEAL Packing System Retrofit Kits
SHAFT DIAMETER
mm
15.9
19.1
31.8
38.1
50.8
57.2
63.5
76.2
88.9
101.6
114.3
Emerson sales office
SINGLE PTFE PACKING
Inches
5/8
3/4
1-1/4
1-1/2
2
2-1/4
2-1/2
3
3-1/2
4
4-1/2
about this equipment, always mention the valve serial number.
RPACKXRT752
RPACKXRT762
RPACKXRT772
RPACKXRT782
RPACKXRT792
RPACKXRT802
RPACKXRT812
RPACKXRT822
RPACKXRT832
RPACKXRT842
RPACKXRT852
CL600 Control-Disk Valve
January 2019
GRAPHITE PACKING
RPACKXRT862
RPACKXRT872
RPACKXRT882
RPACKXRT892
RPACKXRT902
RPACKXRT912
RPACKXRT922
RPACKXRT932
RPACKXRT942
RPACKXRT952
RPACKXRT962
23
Advertisement
Table of Contents
