Troubleshooting; Important Safeguards - Tesla FS200 User Manual

TROUBLESHOOTING

Problem
Do not work.
The water flosser
only operates for
several minutes
after charged.
The water pressure
is low.
No flossing
happened.

IMPORTANT SAFEGUARDS

When using electrical products, especially when children are
present, basic safety precautions should always be followed.
DANGER:
To reduce the risk of electrocution:
• Always unplug the product after using.
• Do not handle the plug with wet hands.
• Do not place in or drop into water or any other liquid.
• Do not use while bathing.
• Do not place or store product where it can fall or be pulled
into a bathtub, or sink.
• Do not reach for a product that has fallen into water. Unplug
immediately.
Possible Cause
(a) New one, bought
just now.
(b)Stored over 3 months.
(a) No fully charged,
low-battery.
(b) At the end of battery
lifetime.
(a)The nozzle is blocked.
(b)The nozzle is
deformed.
(c)The pump is blocked.
(a)There is no water in the
reservoir.
(b)There is not correct
angle when using the
flosser.
(c)The water pipe is not
essembled well.
(d)The pump is blocked.
8
Solution
(a) Charge the water
flosser over 3 hours.
(b)Contact service.
(a) Charge the water
flosser over 3 hours.
(b)Contact service.
(a) Replace the nozzle.
(b)Contact service.
(a) Fill water into the
reservoir.
(b) Direct the nozzle
at 90-degree angle to
gumline.
(c) Essembled the water
pipe well.
(d) Contact service.