Loading The Racks; Cleaning And Maintenance; Troubleshooting - Whirlpool WIC 3C26 F Quick Manual

Hide thumbs Also See for WIC 3C26 F:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
MULTIZONE - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent. By de-
fault the appliance washes dishes in all racks.
-
DELAY
The start of the program may be delayed for a period of time
between 1 and 12 hours.
The DELAY function cannot be set once a wash cycle has been started.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be off.

LOADING THE RACKS

CUTLERY RACK
(loading example for the
cutlery rack)
The third rack was designed
to house the cutlery.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

TROUBLESHOOTING

In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS
POSSIBLE CAUSES
The dishwasher does
No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.
not fill the water.
The inlet hose is bent.
Display shows: H,
6 and On/Off LED is
The sieve in the water inlet hose is clogged; it is
blinking rapidly
necessary to clean it
Dishwasher finishes
Drain hose positioned too low or siphoning
the cycle prematurely.
into home sewage system.
Display shows: 15 and
On/Off LED is blinking
Air in water supply.
rapidly
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
2
UPPER RACK
(loading example for the upper rack)
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
B
A
C
Please scan the QR code on your product in order to have more detailed information.
NaturalDry - is a convection drying system which automatically opens the
door during/after drying phase to ensure exceptional drying performance
every day. Door opens at the temperature that is safe to your kitchen furniture.
As additional steam protection, special designed protection foil is added to-
gether with the dishwasher. To see how to mount protection foil please re-
fer to (INSTALLATION GUIDE).
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
(loading example for
the lower rack)
More information in the Daily Reference Guide on website.
CLEANING THE SPRAY ARMS
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-
washer and reboot.
After having carried out the verification and cleaning, turn off and turn on
the dishwasher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).
Check for siphoning into home sewage system, install air admittance valve if
necessary.
Check water supply for leaks or other issues letting air inside.
CAPACITY: 14 standard place-settings
LOWER RACK
For pots, lids, plates, salad bowls,
cutlery etc. Large plates and lids
should ideally be placed at the sides
to avoid interferences with the
spray arm.
The lower rack has tip-up supports
which can be used in a vertical
position when arranging plates or
in a horizontal position (lower) to
load pans and salad bowls easily.
The lower spray arm may
be removed by pulling it
upwards.
:
400011666863
02/2023 ks - Xerox Fabriano
IEC 436

Advertisement

Table of Contents
loading

Table of Contents