Samsung GT-C3510T Service Manual page 53

5
1) After lifting PBA upward,
disassemble TSP FPCB under the board.
※ Caution
1) Be careful not to make scratch and molding
damage.
7
1) Separate bracket hooks on 3 points
2) Separate LCD connector from the bracket.
※ Caution
1) Be careful not to damage LCD FPCB.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Separate PBA and the front Assembly.
※ Caution
1) Be careful not to make scratch and molding
damage.
2) Be careful not to damage the PBA.
8
1) Lift LCD top and separate it from the
front case.
※ Caution
11-2
Exploded View and Parts List