Table of Contents
Advertisement
Exploded View and Parts List
1) Detach the slide FPCB connector from board
using the tweezers.
※ Caution
1) Not to scratch or damage the Slide FPCB.
1) Unscrew 6 points of the Lower.
※ Caution
1) Be care of scratch and molding damage.
This Document can not be used without Samsung's authorization
5
7
SAMSUNG Proprietary-Contents may change without notice
1) Unscrew 6 points of the Rear.
※ Caution
1) Do not force much power on the screws.
1) Open the LCD connector and slide FPCB
connector and CIF, Receiver, Motor Ass'y
FPCB Connecotr and detach them from the
LCD PBA.
11-2
6
8
Advertisement
Table of Contents
