Error Messages - Sony DVP-NW50 User Manual

Utility for in-wall unit
Hide thumbs Also See for DVP-NW50:
Table of Contents

Advertisement

Error Messages

If any of the messages below appear on your computer, check the following table to solve the problem. If any problem persists,
consult your nearest Sony dealer.
Setting up Utility for Unit
Message
This application has already started by
another PC in the LAN
The same name is already being used
The same IP address is already being
used
All units' set up will be overwritten.
OK ?
Selecting the Playlist from your computer
Message
No Playlist found
Application found a playlist incompatible
with M3U. Please convert the playlist into
M3U format.
The selected playlist/track will be deleted.
Are you sure?
Selecting "Disc" from your computer
Message
Can't access the specified unit
No Disc
Door is open
Cause
Another computer connected to
your network has already
started the Utility for In-Wall
Unit software.
The Unit name you entered
is already in use by another
Unit on the network.
Another Unit on the network is
already using the IP address you
entered.
This message appears when "OK"
or "Apply" is clicked in the "Utility
for In-Wall Unit Setup Menu"
window for all Units.
Cause
The search did not find any playlists
matching the criteria you entered.
This message is displayed when
a playlist is found that is not
in M3U-format.
This message is displayed when
you try to delete a playlist or a
track.
Cause
The computer cannot access the
specified unit for some reason.
This message is displayed if you
select CD/DVD as the input source
when there is no disc mounted in the
drive of the selected Unit or computer.
For safety reasons, closing a Unit's
door remotely is not supported.
Corrective action
Only one computer at a time on a particular
network can run the Utility for In-Wall Unit software.
All device names on the network must be unique.
Enter a different name.
The IP addresses of devices on the network
must be unique. Enter a different IP address.
Click "OK" to continue with overwriting the setup
data for all Units. Click "Cancel" to cancel overwriting
of the setup data for all Units.
Corrective action
Convert the playlist into M3U-format.
Press "OK," and a playlist or a track will be deleted.
Corrective action
Contact your nearest installer to check your network
and electrical connections.
Insert a disc appropriate to the drive in the Unit or
computer.
Go to the unit whose door is open, and close it.
Continue to the next page l
Additional Information
Chapter 3
36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdp-nw10

Table of Contents