Connection Through Usb; Before Connection; Installation - Sony DRX-800UL Operating Instructions Manual

Connection through USB

Note
This product including bundled software functions properly under Windows XP and
Windows 2000.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.

Before Connection

• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.

Installation

These instructions apply to most commonly used computers.
For connection cautions, refer to the "Installation" section in "Connection
through i.LINK" on page 11.
1
Start your computer.
2
Connect the necessary cables, then turn on the drive.
• Connect the USB cable to the drive's USB connector.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive's DC IN jack, and connect the power
cord to the power outlet.
Power Switch
14
USB Cable
AC adapter AC power cord