Table of Contents
Advertisement
FOR THE
ADMINISTRATOR
Settings mode password
The administrator password is required to change the
machine's settings mode.
Settings mode can be changed from either the operation panel
or using a computer web browser. After setting up the
machine, refer to [SETTINGS MODE] in the User's Manual to
set a new password.
Password for logging in from this
machine
The factory default password for the machine is "admin".
Password for logging in from a computer
In the factory default state, the only account that can be used
to log in from a web browser is the "Administrator" account.
When user authentication is enabled, the "System
Administrator" account can be also be used for login. In
addition, a fixed user can be specified as a login user. The
default password of each account is shown below.
When you log in as an "Administrator" or "System
Administrator", you can manage all settings that can be
accessed from a web browser.
Account
User
users
Administrator
admin
System
sysadmin
Administrator
Forwarding all transmitted and
received data to the administrator
(document administration function)
This function is used to forward all data transmitted and
received by the machine to a specified destination (Scan to
E-mail address, Scan to FTP destination, or Scan to Network
Folder destination).
This function can be used by the administrator of the machine
to archive all transmitted and received data.
To configure the document administration settings, click [Application
Settings] and then [Document Administration Function] in the Web
page menu. (Administrator rights are required.)
Points to notice when connecting to
the network
When connecting the machine to the network;
Password
users
admin
sysadmin
SOFTWARE LICENSE
The SOFTWARE LICENSE will appear when you install the
software from the CD-ROM. By using all or any portion of the
software on the CD-ROM or in the machine, you are agreeing
to be bound by the terms of the SOFTWARE LICENSE.
The format, exposure, and resolution settings of
transmitted and received data remain in effect when
the data is forwarded.
Do not directly connect to the internet but to the sub
•
network (range divided by the router) in which only the
authorized device (such as PC) for the communication
with the machine in the protected LAN in some way
like firewall is connected.
Manage the connected devices in the sub network so
•
that the network condition may always be maintained.
Use the filter setting function to prevent illegal access.
•
Be sure to log out when leaving your computer while
•
changing the web page settings for security purposes.
For security purposes, do not access any other site
•
while you are logged in to the web page setting site.
7
Advertisement
Table of Contents
