Remote Control - Optoma H182X Manual

User Controls
VGA
Enter
Menu Zoom
 The interface
is subject to
model's specifi-
cations.
20
English

Remote Control

Using the Remote Control
Power
Source
Re-Sync
Video
HDMI
3D
Four Directional
Select Keys
AV Mute
Enter
Mute
VGA
Keystone +/-
Aspect
Menu
Volume +/-
Brightness
Mode
Zoom
Refer to the "Power On/Off the Projector"
section on pages 13-14.
Press "Source" to select an input signal.
Automatically synchronizes the projector to
the input source.
Press "Video" to switch between Composite
Video or S-video signals.
HDMI
Press " " to choose HDMI source. (For
certain model)
Press the "3D" to turn the 3D OSD menu on/
off.
Use to select items or make
adjustments to your selection.
Momentarily turns off/on the audio and video.
Confirm your item selection.
Momentarily turns off/on the audio. (For
certain model)
Press "VGA" to choose VGA sources.
Adjust image distortion caused by tilting the
projector.
Use this function to choose your desired
aspect ratio.
Press "Menu" to launch the on-screen dis-
play (OSD) menu. To exit OSD, press "Menu"
again.
Adjust to increase / decrease the volume.
(For certain model)
Change the brightness mode: Bright->Eco-
>Dynamic->Eco+. (refer to page 44)
Zoom in on an image.
Press buttons to alter zoom.