Fujitsu LPF-7200E User Manual page 24

Basic Operation
POWER
MOUSE
PJ
SOURCE button
ZOOM-PAN
AUTO button
Displaying Projector Status
•
Press the STATUS button.
The following statuses are displayed when the
STATUS button is pressed.
1 Present input source
2 Image mode in present input source
3 Lamp timer
4 Resizing status
5 Mute status
6 Volume status
7 Brightness
8 Contrast status
Press the STATUS button again to return to the
original screen.
Adjusting Distortion of the Image Trapezoid
•
Press the KEYSTONE buttons ( , ).
The adjustment screen is displayed.
When is pressed, the upper part of the image is corrected.
The screen is exited soon after adjustment is completed. (It can also be exited by pressing the MENU button.)
En-24
MUTE
LASER
RGB VIDEO
MENU ENTER/R-MOUSE
SOURCE VOLUME
CANCEL
AUTO STATUS
STATUS button
ZOOM FOCUS KEYSTONE
KEYSTONE buttons
Keystone correction
(continued)
AUTO button
Automatically Adjusting the Position
•
Press the AUTO button.
The horizontal position, vertical position, picture
width and picture blurring are automatically adjusted.
Displaying the Input Source
•
Press the SOURCE button.
The input source and image mode are displayed.
Press the SOURCE button again to return to the
original screen. (If no keys are pressed for xxx
seconds, the display returns to the original screen.)
0
When
POWER
MUTE
RGB VIDEO
AUTO STATUS MENU
ZOOM FOCUS KEY STONE VOLUME
KEYSTONE buttons
is pressed, the lower part of the image is corrected.
ENTER
STATUS button