Tripp Lite SmartRack SRCABLEDUCT1UHD Owner's Manual

High-capacity horizontal cable manager

Download this manual

SmartRack

Horizontal Cable Manager

Introduction

SRCABLEDUCT Horizontal Cable Managers route patch cables horizontally at the front or the rear of a

standard 19-in. rack. Plastic finger ducts and a dual-hinge cover help organize patch cables and reduce

cable stress within a rack enclosure cabinet or open-frame rack.

Included Hardware

• 4 x M6 Cage Nuts

• 4 x M6 / #12 Cup Washers

• 4 x M6 Flat Washers

• 4 x M6 Screws

• 4 x #12 Flat Washers

• 4 x #12-24 Screws

Owner's Manual

Models: SRCABLEDUCT1UHD, SRCABLEDUCT2UHD

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

High-Capacity

Page 1 Register your product today and be automatically entered to win an ISOBAR surge protector in our monthly drawing! www.tripplite.com/warranty 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2019 Tripp Lite. All rights reserved. SmartRack is a trademark of Tripp Lite.
Page 2 Installation Note: The following diagrams show the SRCABLEDUCT2UHD being installed in a rack enclosure. SRCABLEDUCT1UHD uses the same procedure, but the cage nuts will be installed with 1U rack spaces between them rather than 2U. Both the 1U and 2U units can also be installed in a 2-post or 4-post rack in the same manner, but 12-24 hardware will be used for 2-post mounting.
Page 3 FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
Page 4 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 19-07-223 93-3109_RevB...

Smartrack srcableduct2uhd