Related Manuals for Philips 75PUN7133
Summary of Contents for Philips 75PUN7133
- Page 1 Register your product and get support at 7133 series www.philips.com/TVsupport User Manual 75PUN7133...
-
Page 2: Table Of Contents
Contents 1 Get Support 13 Ambilight 1.1 Identify and Register your TV 13.1 Ambilight Style 1.2 TV Help and User Manual 13.2 Ambilight Brightness, Saturation 1.3 On-line Help and User Manual 13.3 Ambilight+hue 1.4 Consumer Care / Repair 13.4 Advanced Ambilight Settings 2 Software 14 Environmental 2.1 Update Software... -
Page 3: Get Support
On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/TVsupport. -
Page 4: Software
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. -
Page 5: Quick Guide
• Fast forward , to go fast forward • Record , to start recording. Quick Guide 3 - (Ambilight) To select one of the Ambilight style or switch off Ambilight. Remote Control 4 - (Sleep Timer) To start and set the sleep timer. Batteries and Cleaning 5 - ... -
Page 6: Ir Sensor
To navigate up, down, left or right. Joysticker - Local Control 10 - (Picture Format) To open or close the Picture Format menu. Keys on TV If you lost the remote control or its batteries are Bottom empty, you can still do some basic TV operations. To open the basic menu…... -
Page 7: Setting Up
Setting Up Read Safety • 75PUN7133 Read the safety instructions first before you use the VESA MIS-F 400x400, M8 (Minimum 15 mm, Maximum 20 mm) To read the instructions, in Help > User manual, Preparation press the color key ... - Page 8 On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press ...
-
Page 9: Connections
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. Copy protection When you connect a device, the TV recognizes its type and gives each device a correct type name. -
Page 10: Audio Device
Headphones You can connect a set of headphones to Audio Device the connection on the side of the TV. The connection is a mini-jack 3.5mm. HDMI ARC Only HDMI 1 on the TV has HDMI ARC (Audio Return Channel). If the device, typically a Home Theater System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. - Page 11 > Network > Reset Wi-Fi Miracast Download the Philips TV Remote App from your connection. favorite app store today. The Philips TV Remote App is available for iOS and Android and is free of charge. * When use your phone as a remote control, TV...
-
Page 12: Other Device
cannot be switched on or off via your phone. Other Device USB Flash Drive You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on. -
Page 13: Switch Source
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (left) or (right) and press OK. • To close the source menu without switching to a device, press ... -
Page 14: Channels
channels. 3 - Select Start and press OK to update channels. Channels This can take a few minutes. Weak Channel Installation About Channels and Switch (Home) > Settings > Install Channels Channels > Antenna/Cable Installation > Weak channel installation To watch TV channels The digital frequency is shown for this channel. -
Page 15: Channel List
Closed Caption Create or Edit Favorites Channel List Switch Closed Caption On or Off with this options. LIST > OPTIONS > Create favorites list Select On During Mute to show closed captions Select a channel then press OK to add in a favorites only when the sound is muted with . -
Page 16: Favorite Channels
The locked channel will have next to the channel Favorites List on TV Guide logo. You can link the TV Guide for your Favorite List. 1 - While watching a TV channel, press LIST > OPTIONS > Select channel Remove Favorite List list. - Page 17 Audio Language If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language. 1 - While you watch TV, press OPTIONS. 2 - For digital channels, select Audio Language. For analog channels, select Alternate Audio. Press OK to confirm your selection.
-
Page 18: Recording
Watch a recording Recording (Home) > Watch TV > Recordings • In the list of recordings, select the recording you What you need want and press OK to start watching. • You can use the To record a TV programme you need… keys ... -
Page 19: Videos, Photos And Music
Slideshow speed Set the speed of the slideshow. Videos, Photos and Slideshow transitions Set the transition from one picture to the next. Music Videos From a USB Connection Play Videos You can view your photos or play your music and videos from a connected USB flash drive or USB Hard To play a video on the TV…... -
Page 20: Music
Play videos repeatedly or once. Music Play Music Open music folder 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and press (right) to select the USB device you need. 3 - Select Music and select one of music, you can press OK to play the selected music. -
Page 21: Open Tv Setting Menus
the connected audio system. Ambilight style - Select one of preset Ambilight styles. Open TV Setting Ambilight+hue - Switch Ambilight+hue on or off. Sleep timer - Set the TV to switch to standby Menus automatically after a preset time. Screen off - If you only listen to music on TV, you can switch off the TV screen. - Page 22 Connect HDMI devices supportings HDR on HDMI Adjust the color enhancement 1/HDMI 2/HDMI 3. (Home) > Settings > All The styles for HDR content are... settings > Picture > Expert mode settings > Color enhancement • HDR Personal • HDR Vivid Select Maximum, Medium, or Minimum to set the •...
- Page 23 memory device. (Home) > Settings > All settings > Picture > Expert mode * Only HDR10 and Hybrid Log Gamma HDR are settings > MPEG artifact reduction supported Select Maximum, Medium, Minimum to have different degrees of smoothing the artifacts in digital video content.
- Page 24 to wide screen. Custom a style • Fill screen – automatically enlarges the picture to You can adjust and stored sound settings in the fill the screen. Picture distortion is minimal, subtitles currently selected sound style. remain visible. Not suitable for PC input. Some extreme picture formats may still show black bars.
- Page 25 leveling Adjust the loudness level from device which is Delta volume connected to digital audio output (SPDIF) or HDMI. (Home) > Settings > All • Select More to have louder volume. settings > Sound > Advanced > Delta volume •...
- Page 26 Adjust the motion speed of the USB mouse. switch off Ultra HD for this HDMI connection. • The setting Optimal allows maximum up to Ultra HD (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2 signals. HDMI-CEC Connection - EasyLink • The setting Standard allows maximum up to Ultra HD (50Hz or 60Hz) YCbCr 4:2:0 signals.
- Page 27 (Home) > Settings > All settings > General (Home) > Settings > General settings > Eco settings > Screen off settings > Reinstall TV Select Screen off, the TV screen is switched off, to Enter PIN code and select Yes, the TV will reinstall switch the TV screen back on, press any key on the completely.
- Page 28 preset time. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown Lock Settings Set Code and Change Code...
-
Page 29: Network
(Home) > Settings > All settings > Network > Connect to network > WPS To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. If your router has WPS, you can directly connect to the router without scanning for networks. -
Page 30: Network Settings
1 - Select Static IP configuration and configure the connection. 2 - You can set the number for the IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Network > Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. - Page 31 Clear Internet Memory (Home) > Settings > All settings > Network > Clear Internet Memory With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favorites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV.
-
Page 32: Smart Tv
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores. -
Page 33: Ambilight
> Ambilight > Ambilight style > Follow In this first step, you will prepare the TV to find Color the Philips Hue Bridge. The TV and the Philips Hue Bridge must use the same network. Select one of the preset color styles. - Page 34 2 - Select Start now and press OK. The TV will 1 - Select a bulb to configure and press OK. The search for the Philips Hue Bridge. If the TV is not yet bulb you selected is flashing. connected to your network, the TV will start the 2 - Select Start and press OK.
-
Page 35: Advanced Ambilight Settings
Bridge and bulbs. (Home) > Settings > All settings > Ambilight > Ambilight + hue > Reset configuration Reset current setup of the Ambilight+hue. 13.4 Advanced Ambilight Settings Wall color (Home) > Settings > All settings > Ambilight > Advanced > Wall color •... -
Page 36: Environmental
1 year. You can also find the power consumption values for this product on the Philips website for your country www.philips.com/TVsupport 14.2 End of Use... -
Page 37: Specifications
• Digital audio playback (ISO/IEC 13818-3) Component, Composite 15.3 Display Resolution Composite • PAL, NTSC Diagonal screen size Component • 75PUN7133: 189 cm / 75 inch • 480i Display resolution • 480p • 3840 x 2160 • 576i • 576p • 720p - 50Hz, 60Hz 15.4... -
Page 38: Sound
• 1920 x 1200 - 60Hz • Digital Audio out - Optical • 3840 x 2160 - 60Hz • USB 1 - USB 3.0 • Network LAN - RJ45 • Antenna (75 ohm) 15.6 • HDMI 1 in - ARC - UHD •... -
Page 39: Troubleshooting
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual. -
Page 40: Channels
Press Settings > Help > Check the TV. • If the picture size changes all the If the video clip stays black, call Philips. Wait until the time, press Picture Format > Fit to screen. clip ends and select Contact info in the Help menu. -
Page 41: Hdmi - Uhd
compatible. EasyLink features only work with devices 16.6 that are HDMI-CEC compatible. Sound No volume icon shown • When an HDMI-CEC audio device is connected and No sound or poor sound quality you use the TV Remote Control to adjust the volume •... -
Page 42: Wrong Menu Language
16.10 Wrong Menu Language Change the language back to your language. 1 - Press (Home), select Settings > Region and language > Languages > Menu language and press 2 - Select the language you want and press OK. 3 - Press BACK to close the menu. -
Page 43: Safety And Care
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use. -
Page 44: Screen Care
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. -
Page 45: Terms Of Use
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warranter in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. -
Page 46: Copyrights
19.4 DTS HD Copyrights For DTS patents, see http://patents.dts.com. 19.1 Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS- HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights MHL, Mobile High-Definition Link and the MHL Logo Reserved. -
Page 47: Open Source
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 20.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software. - Page 48 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
- Page 49 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
- Page 50 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
-
Page 51: Disclaimer Regarding Services And/Or Software Offered By Third Parties
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations. -
Page 52: Index
Contrast 22 On-line User Manual 3 Date 27 Digital Audio Out - Optical 10 Digital Media Renderer - DMR 30 Philips Support 3 Digital Out Delay 25 Photos, Videos and Music 19 Digital Out Format 25 Picture Clean, Noise Reduction 23... - Page 53 Register TV 3 Remote Control 5 Remote Control - IR Sensor 6 Remote Control and Batteries 5 Rename Device 13 Repair 3 Reset Settings 27 Safety and Care 43 Screen Off 26 Sharpness 22 Shop Setup 27 Sleep Timer 27 Smart TV 32 Software Version 4 Sound Menu 24...