Chapter 3. Disassemble And Assemble; Le48M7000A; Remove The Stand; Remove The Back Cabinet - Haier LE48M7000A Service Manual

Chapter 3. Disassemble and Assemble

3-1. LE48M7000A

3-1-1. Remove the Stand

1. Lay down the TV set .
2. Remove the two c
3. Remove the four screws from the stand which
in the picture above.
4. Remove the stand.

3-1-2. Remove the Back Cabinet

1.Remove the twenty two screws indicated with red
circles.
2. Flip machine, panel side up.
3.Carefully raise the Front shell from bottom.
11
Service Manual
Model No.: LE48M7000A

3-1-3. Remove the Mainboard

1. Remove the three screws indicated with red circles.
2. Remove the main board.

3-1-4. Remove the Power Supply Module

3-1-4. Remove the Speaker

1. Remove the screws indicated by red circle in
below picture.
2. Turn over the cover, remove the two screws indicated
by red circle in below picture, then you can take off
the speaker