Charging Your Asus Phone - Asus ZenFone V Live User Manual

Charging your ASUS Phone

Your ASUS Phone comes partially charged but you must charge it fully before using it for the first
time. Read the following important notices and cautions before charging your device.
IMPORTANT!
• For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device
and prevent the risk of injury.
• For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone.
• Peel off the protective film on the AC power adapter and cable before using it with your device.
• Ensure to plug the AC power adapter to a compatible power outlet. You can plug the AC power
adapter to any compatible 100~240 V outlet.
• The output voltage of the AC power adapter for this device is DC 5V, 2A.
• When using your ASUS Phone while plugged-in to a power outlet, the power outlet must be near
your device and easily accessible.
• Do not use or expose your ASUS Phone near liquids, rain, or moisture.
• Do not use your ASUS Phone near heating equipment or in places where there is likelihood of high
temperature.
• Keep your ASUS Phone away from sharp objects.
• Do not place objects on top of your ASUS Phone.
CAUTION!
• While charging, your ASUS Phone can become warm. This is normal, however, if your device
becomes unusually hot, disconnect the cable from your device and send the device, including the
AC power adapter and cable to an ASUS-qualified service personnel.
• To prevent any damage to your ASUS Phone, AC adapter, or cable, ensure that the cable, AC adapter,
and your device are connected properly before charging.
WARNING!
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, expose to fire, explosion or other hazard.
• Only use the battery with a charging system that has been qualified with the system per CTIA
Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified
battery or charger may present a risk of fire, explosion, leakage, or other hazard.
• Replace the battery only with another battery that has been qualified with the system per this
standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage
or other hazard.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard
surface, and the user suspects damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion or other hazard.
Chapter 1: Get your Zen ready!
12