Table of Contents
Advertisement
Installer's Guide
Connection Pipe Requirements
The maximum distance of the connection piping in both height and total length is provided in the
table below. Do not install these units in locations that exceed these specifications.
Heat Pump
Refrigerant Charge (oz.)
Standard Length ft (m)
Additional Refrigerant Charge (oz/ft)
For Piping Beyond Standard Length
Liquid Pipe in. (mm)
Outer Diameter
Gas Pipe in. (mm)
Height ft. (m)
Max Distance
Length ft. (m)
Minimum Piping Length ft. (m)
Compressor Oil Used
NOTES:
1. The connection pipes should be insulated with proper water-proof insulating material
2. Use type ACR copper piping.
3. Shorter connecting pipe lengths result in greater thermal efficiency, so it is preferable to reduce
connecting pipe lengths where possible.
4. Refer to the oil trap instructions for specific requirements when there is height difference
between the indoor and outdoor unit greater than 20 ft. (6m).
Operating Ranges
Heating Operating Range
Cooling Operating Range
Indoor Operating Range
10
NOTICE
M4THS1809
M4THS1812
M4MHW1809
M4MHW1812
46
0.22
3/8" (9.525)
Φ 1/2" (12.7)
100 (30.5)
DAPHNE FVC50K
(PVE Oil)
Outdoor Temperature -4 - 75°F (-20 - 24°C)
Outdoor Temperature 0 - 115°F (-18 - 46°C)
Indoor Temperature
M4THS1818
M4MHW1818
48
56
25 (7.6)
0.2
Φ 1/4" (6.35)
55 (16.76)
10 (3)
RB68EP (POE Oil)
61 - 86°F (16 - 30°C)
M4THS1824
M4MHW1824
78
0.5
5/8" (15.875)
130 (39.6)
88-M4MHW18-1C-EN
Advertisement
Table of Contents
