Table of Contents
Advertisement
3.
Press a button from
Accompaniment Pattern you want to edit.
The name of the pattern will appear on the display.
D r m : R h
Variation selected
Pattern selected by each button
: Intro
: Normal, Normal Fill-in
(Each press toggles the selection.)
: Variation, Variation Fill-in
(Each press toggles the selection.)
: Ending
4.
Press
to select the instrument part you want
to edit.
The part number of the part you select will flash on the
display.
Parts that contain data.
5.
Press
(RHYTHM).
This will display the rhythm name.
6.
Use the
(10-key) [–] and [+] keys to select
the rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
number by pressing
• All of the eight instrument parts of an intro (I-1 to I-8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
to
to select the
y
Flashing: Part selected for editing.
Part 6 (Chord 3)
.
Editing Auto Accompaniment Patterns
7.
To edit the other contents, press
(FUNCTION) to display the screen for the
setting you want.
• Each press of
(FUNCTION) will cycle through the
settings shown below, from 1 through 6.
• Use the
(10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
pressing
.
Setting Type
1 Part on/off
2 Tone number*
3 Volume level
Left-right speaker balance
4
(panning)
5 Reverb depth (reverb send) Rvb
6 Chorus depth (chorus send) Cho.
* Instrument parts 1 and 2 can be assigned drum set tones
(built-in tones 684 to 700) only.
8.
Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
9.
Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
you want (intro through ending).
10.
Press
.
This will display a message asking if you want to save the
user rhythm.
Display
Settings
Part
On/Off
Tone
001 - 683
Vol.
000 - 127
Pan
–64 - 0 - +63
000 - 127
000 - 127
EN-45
Advertisement
Table of Contents
