Wiring
This section contains the block diagram of the module and outlines various connection
options.
For more information on front connector wiring and creating cable shields, for example, refer
to the "Wiring" section in the S7-1500 Automation System
(http://support.automation.siemens.com/WW/view/en/59191792) and ET 200MP distributed
I/O system (http://support.automation.siemens.com/WW/view/en/59193214) system
manuals.
Note
You may use and combine the different wiring options for all channels.
Note
Do not insert the potential jumpers included with the front connector!
Abbreviations used
QV
QI
n
S
+/S
n
L+
M
M
ANA
CHx
PWR
Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)
Manual, 07/2014, A5E03484696-AC
Voltage output channel
n
Current output channel
-
Sense line channel
n
Supply voltage connection
Ground connection
Reference potential of the analog circuit
Channel or display of the channel status
Display for the supply voltage
3
11