Operation - Hilti TE 60-AVR Original Operating Instructions

Rated power input
Rated current input
Weight in accordance with EPTA proce-
dure 01/2003
Single impact energy in accordance with
EPTA procedure 05
Hammer drill bits, Ø
Ø Breach bits
Ø Percussion core bits
Ø PCM diamond core bits
Ø drill bits for metal
Ø Drill bits for wood
Chuck
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Hammer drilling in concrete (a
Chiseling (a )
h,Cheq
Uncertainty (total vibration)
5

Operation

5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the tool holder from the front and into the recess provided.
*2134769*
TE 60­AVR
1,350 W
7.2 A
6.8 kg
7.8 J
12 mm ... 55 mm
40 mm ... 80 mm
45 mm ... 100 mm
•/•
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
)
)
WA
)
pA
)
pA
)
h, HD
3
2134769
TE 60-ATC/AVR
1,350 W
7.2 A
7.8 kg
7.8 J
12 mm ... 55 mm
40 mm ... 80 mm
45 mm ... 100 mm
42 mm ... 102 mm
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
TE 60­AVR TE 60-ATC/AVR
107 dB(A) 111 dB(A)
3 dB(A) 3 dB(A)
96 dB(A) 100 dB(A)
3 dB(A) 3 dB(A)
TE 60­AVR TE 60-ATC/AVR
10.5 m/s² 7.2 m/s²
9.1 m/s² 6.2 m/s²
1.5 m/s² 1.5 m/s²
English 7