Sony XQ-CC72 Help Manual page 21

Connect one end of the USB cable to the charger (or to the USB port of a computer).
1
Connect the other end of the cable to the USB port on your device.
2
The notification light illuminates when charging begins.
When the device is fully charged, disconnect the cable from your device by pulling it straight outwards.
3
Make sure not to bend the connector.
Battery notification light status
Green: Battery is charging, charge level is greater than 90%
Orange: Battery is charging, charge level is 15%–90%
Red: Battery is charging, charge level is less than 15%
Note
If the message below appears on your device, a charging malfunction has occurred. Please stop using your device and contact
an authorized Sony service partner for repair.
Related Topic
Battery and power management
G-441-100-12 Copyright 2022 Sony Corporation
21